好氧颗粒污泥对有机物吸附类型的研究

为探索好氧颗粒污泥对有机物的去除机制,进行好氧颗粒污泥对有机物的吸附性能及吸附类型研究,在实验室条件下,采用动态吸附方式,利用SBAR反应器分析好氧颗粒污泥对有机物的去除情况。结果表明,好氧颗粒污泥存在初期吸附作用,最佳吸附时间为30~45 min,COD去处率60%;通过对失活前后好氧颗粒污泥对有机物吸附性能测定以及红外光谱分析,探究好氧颗粒污泥对有机物的吸附类型,表明好氧颗粒污泥对有机物的吸附是一个包含生物吸附和化学吸附的复杂过程。     

Black cherry growth response to ambient ozone and EDU

Field-grown black cherry (Prunus serotina Ehrh.) seedlings were treated with the antioxidant ethylenediurea (EDU) to evaluate height, diameter, and above-ground dry-weight biomass growth response to ambient ozone over four years. Nine blocks with 44 trees/block were used in a randomized complete block design with three foliar spray treatments: (1) 1000 ppm EDU mixed with a surfactant and water; (2) surfactant mixed with water; and (3) water only. In each growing season treatments were applied seven times at approximately 10-day intervals. Repeated measures analysis of variance indicated significant (P< or =0.05) treatment and year effects for log-transformed height and diameter growth over the four-year period. After four years, EDU-treated trees were approximately 17% taller and stem diameters were 21% greater than non-EDU-treated trees. Total above-ground dry-weight biomass at the end of four years was 47% greater for EDU-treated trees compared to non-EDU-treated trees.     

钴（Ⅱ）－过氧化氢－苯基荧光酮体系催化光度法测定痕量钴的研究

本文研究了钴（Ⅱ）催化过氧化氢氧化苯基荧光酮的褪色反应，测定了反应级数和表观活化能，建立了测定痕量地的新方法。２５℃时本法检出限为２９×１０－１３ｇ／ｍｌ，线性范围为０．０４～２ｎｇ／１０ｍｌ，催化反应表观活化能为５６．１５ＫＪ／ｍｏｌ。该方法己用于维生素Ｂ１２、人发和茶叶中痕量钴的测定．结果满意，相对标准偏差为２．４～３．４％。     

湖南未耕种土壤中~(234、238)U、~(226)Ra、~(210)Po和~(210)Pb的分布和移动规律的研究

本文采集了湖南省十三个地区未耕种的０８０ｃｍ不同类型土壤样品，分别测定了０１０ｃｍ、２０３０ｃｍ、４０５０ｃｍ、７０８０ｃｍ样品中的２３４、２３８Ｕ、２２６Ｒａ、２１０Ｐｂ、２１０Ｐｏ含量，研究了土壤中铀系放射性核素分布影响和移动规律     

城市空气质量日报自动发布系统的研究与开发

详细介绍了“城市空气质量日报自动发布系统”的开发背景和开发过程 ,并对系统整体的架构和所用到的技术作了针对性的说明 ,阐明了作者对此类系统的前景和发展方向的看法。     

林格曼数监测存在的问题及时间——林格曼数计算方法的探讨

分析并讨论了目前国内关于锅炉烟尘林格曼数（黑度级）监测计算几种取值方法存在的问题，对时间－林格曼数这一新的取值方法进行了探讨。     

Occurrence and congeners specific of poiychlorinated biphenyls in agricultural soils from Southern Jiangsu, China

A total of 198 agricultural soil samples were collected from Zhangjiagang and Changshu in Southern Jiangsu for analysis of 13 polychlorinated biphenyls (PCBs) in order to assess the levels of pollution, sources, area distribution, and potential risk for the environment. All methods were rigorously tested and an adequate quality control was ensured. Only one site had no PCBs residues, and the highest total PCBs concentration in the surface soils was 32.83 ng/g. The average concentration in all the soil samples was 4.13 ng/g, signaling low-level pollution. Tetra-, penta-, and hexa-chlorinated biphenyls were dominant species in soil samples, accounting for more than 75% ofΣPCBs in the soil samples. PCB118 was the most abundant congener in all the samples. The PCB118 was about 20% ofΣPCBs. The soil organic matter content showed only a weak correlation with the levels of all PCB congeners, in which a better correlation was noted for the more volatile lighter PCB congeners than for the heavier homologues. To a certain extent, the sources and land use seemed to influence the levels of PCBs.     

含酚废水治理方法的研究

根据含酚废水的性质，用ClO2氧化除酚，ZL—1和聚丙烯酰胺(PAM)混凝沉降除悬浮物的方法处理该废水。实验结果表明，经处理后废水中的主要污染物酚、焦油和悬浮物等去除率都很高，该水可以满足循环使用的要求。     

圆杯—多边形杆复合挤压的上限研究

此文采用三次多项式表示的流线速度场和基元圆环技术相结合的混合流动模型对国杯—多边形截面杆型复合挤压进行了上限分析,得到挤压力的上限解,分析了杆部截面形状对复合挤压分流点位置及变形力的影响规律并对理论计算进行了实验验证.     

A regional environmental management information system for Chinese EPA—the system analysis and design

REMIS is one of key research projects sponsored by the central government. It is recommended to regional EPAs as a main tool of the environmental management. REMIS simulates the functions of the regional EPAs and aimed to improve their management level. The national environmental management information system will base on REMIS.Functional analysis is the kernel of the REMIS system analysis. Data and data flow analysis are used to support the functional analysis.Investigations on the functions of the local EPAs of eight provinces and 12 cities have been taken. The functions were carefully sorted. Modular design method was used in system analysis and system design.The system analysis included functional analysis, data analysis and data flow analysis. The system design is based on the system analysis. HIPO diagram of each modular, data base structure, menu design, selection of hardware and software environment were the main items of the system design.